- To Search: EEPROM programmer 2303 prolific PL2303 EEPROM Writer program pl2303xeepromwriterv1003 eep-pl2303x - pl2303hx/pl2303x development tools, to d YLLPC229XTest - LPC2294 testing procedures note YLLPC22.
- PL2303RA provides a convenient solution for connecting an RS232 full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. Prolific provides highly compatible Virtual COM Port drivers that simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready.
- Pl2303 Eeprom Writer Program
- Eeprom Writer Reader
- Pl2303 Eeprom Writer Program Download
- Pl2303 Eeprom Writer Program For Windows 10
Eeprom writer program pl2303 manufacturers and eeprom writer program pl2303 suppliers Directory - Find eeprom writer program pl2303 Manufacturers, Exporters. The MiniPro TL866 EEPROM programmer software in use. Programming a W25X32 IC. V5.91 Programmer software is here. PL2303Xwriterv1003 EEPROM writer for PL2303, USB to serial converter.
1JanEeprom Writer Program Pl 2303 Prolific Driver
The PL2303HXD is a low cost and high performance USB-to-Serial (USB to UART) Bridge Controller. The PL2303HXD provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL2303HXD highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. The PL2303HXD is exclusively designed for mobile and embedded solutions in mind, providing a small footprint that could easily fit in to any connectors and handheld devices.
Jul 14, 2011 - Refer to this application note if you are migrating from PL-2303H to PL-2303HX. Prolific Technology Inc. Does not make any warranties regarding the. ME/98 driver v2.0.0.19 when using the EEPROM Writer program. May 15, 2012 - Please be informed of following updates on Prolific Support website: PL-2303 EEPROM. PL-2303 Family All-in-One EEPROM Writer Tool v2.0.0.6. For Chip HXA, HXD, XA, EA, RA, TA versions. Includes EEPROM Writer and OTPROM Application Note NOTE: For. PL2305 MP Tool Driver & Test Program.
With very small power consumption in either operating or suspend mode, the PL2303HXD is perfect for bus power operation with plenty of power left for the attached devices. Flexible signal level requirement on the RS-232 serial port side also allows the PL2303HXD to connect directly to 3.3V ~ 1.8V devices. PL2303HXD integrates on-chip clock generator and OTP ROM to save external crystal and EEPROM.
Customers can design with effective BOM cost and compact PCB size.
This will ensure 100% completion rate, and accelerate download times on slower links. To start this download via the Download Manager, please. Download windows server 2008 r2 enterprise edition iso 32 bit iso.
Posted: 2004-10-29 19:24 i want the eeprom writer from prolific. It was mentioned in one of the posts by morgan davis the post read. I FIXED THE PROBLEM! I opened up the box on the cable and found the chip version was pl-2303HX. Got the drivers for it and that didnt work. At this stage i was desparate, and i found on the Prolific site an EEPROM writer, so i tried changing the PID to 2303 from its original 1234. Then i accidentaly hit the 'writer default' button.
It went through and changed a bunch of the eeprom. If any one has downloaded the file from prolific, please could you send it to me? Posted: 2004-11-01 10:00 I'm not really a big expert about eeprom & eep writer, but my idea was to modify something on the pl-2303hx chip of my usb data cable. I read this post and I hope to resolve this problem! Vendor email me that 'The cable have superfluity charge function.
If this function can't use. It isn't product problem. Best wishes!' But charge function doesn't work!!! (( Driver installation was succesfully, before with vendor's driver and then with this driver System Hardware tell me 'Profilic USB-to-Serial Com Port', then I think that i'm not wrong. But, why doesn't my cable charge my phone???
![Pl2303 Eeprom Writer Program Pl2303 Eeprom Writer Program](https://is.alicdn.com/img/pb/488/817/663/663817488_862.jpg)
![Pl2303 eeprom writer program for pc Pl2303 eeprom writer program for pc](/uploads/1/1/9/8/119847580/345101480.jpg)
The cable has a switch that I suppose turn on/off charge function. Posted: 2004-11-01 13:22 i didnt think you need the chip number for eeprom writers. Programmi rascheta transformatorov i drosselej. But if it is necessary i want pl2303. But in any case send me whichever one you have for prolific chips as for the other post, the eeprom/ cable is fine if u can communicate with ur mobile. Th charging doesnt happen because of some loose cables. Open the cable's black box and see if any cables are unconnected. I can guide further, if you reply on above.
STM32 - Flashowanie przez USB
Przypuszczam, że nie chodzi Ci o flashowanie stricte przez USB ;> ? Może być przez wbudowaną w zestaw przejściówkę USB-UART? Do poczytania. W załączniku archiwum ze sterownikiem do przejściówki USB<->UART (PL2303). Profilaktycznie możesz sprawdzić czy w Twoim zestawie nie ma czasem innego układu. Po zainstalowaniu sterownika system Windows ma wykrywać coś w stylu 'Prolific USB to serial com port'. Uwaga - musisz podłączać się do gniazda USB oznaczonego CN3 na płytce. Program do flashowania -> 'Flash Loader Demonstrator' - ściągasz ze strony ST. Jeśli korzystasz z linuksa to driver do przejściówki raczej nie będzie potrzebny, a zamiast Flash Loader Demonstratora możesz wykorzystać stm32flash. Żeby uaktywnić bootloader postępujesz tak jak napisał McMonster. Ten mikrokontroler nie ma bootloadera DFU, więc program 'dfuse' nie zadziała. Jeśli chcesz korzystać z flashowania bezpośrednio przez USB i program 'dfuse' to musisz zaprogramować mikrokontroler odpowiednim wsadem. ST pewnie udostępnia gotowca w bibliotece USB.
- PL2303_Prolific_DriverInstaller_v1_8_0.zip
- PL2303_Prolific_DriverInstaller_v1.8.0.exe
- PL2303 Windows Driver User Manual v1.8.0.pdf
- PL2303_DriverInstallerv1.8.0_ReleaseNote.txt
- checkChipVersion_v1006.exe
- PL2303CheckChipVersion_ReadMe.txt
Pl2303 Eeprom Writer Program
Download file - link to post
Eeprom Writer Reader
PL2303_Prolific_DriverInstaller_v1_8_0.zip > PL2303 Windows Driver User Manual v1.8.0.pdf
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
PL2303 USB-to-Serial Bridge Chip Family
Windows Driver Installer User Manual
WHQL Driver Version Information
? Driver Installer & Build date: 1.8.0 (2013-2-26)
?
?
Windows 2000 / Windows XP (32 & 64-bit) WHQL Driver: v2.1.44.226 (2/5/2013)
?
?
GUID: ECC3713C-08A4-40E3-95F1-7D0704F1CE5E
Compatible with Server 2003 (32 & 64-bit)
Windows Vista / Windows 7 / Windows 8 (32 & 64-bit) WHQL Driver: v3.4.48.272 (2/5/2013)
?
Compatible with Server 2008, Server 2008R2, Server 2012 (32 & 64-bit)
?
Drivers can also automatically install via Windows Update (need Internet connection)
System Requirements
?
PC with USB 1.1/2.0/3.0 Host Controller (USB Port) and following Windows OS Family:
?
?
Windows XP SP2 or SP3 (32 & 64 bit)
?
Windows Server 2003 (32 & 64 bit)
?
Windows Vista (32 & 64 bit)
?
Windows 7 (32 & 64 bit)
?
Windows Server 2008 / 2008 R2 (32 & 64 bit)
?
Windows 8 (32 & 64 bit)
?
?
Windows 2000 SP4
Windows Server 2012 (32 & 64 bit)
USB Device with below PL-2303 chip versions and their supported OS Family:
Windows 2000 / XP
Vista / Windows 7
Windows 8
(32 & 64 bit)
(32 & 64 bit)
(32 & 64 bit)
PL-2303H
Yes
Yes
Not Supported*
PL-2303HX (Rev A) or HXA
Yes
Yes
Not Supported*
PL-2303X or XA
Yes
Yes
Not Supported*
PL-2303HX (Rev D) or HXD
Yes
Yes
Yes
PL2303TA
Yes
Yes
Yes
PL2303TB
Yes
Yes
Yes
PL2303EA
Yes
Yes
Yes
PL2303RA
Yes
Yes
Yes
PL2303SA
Yes
Yes
Yes
Chip Version
* - PL2303H, PL-2303HX (Rev A), and PL-2303X are EOL and discontinued chips and Prolific will not
provide Windows 8 driver support. New driver versions will show yellow mark (Error Code 10) in Device
Manager for these EOL chip versions under Windows 8. Prolific recommends using PL2303HXD chip.
Prolific Technology Inc.
- 1 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Counterfeit Warning!!!
Please be warned that counterfeit/fake PL-2303HX Rev A (or PL-2303HXA) USB-to-Serial Controller
ICs using Prolific's trademark logo, brandname, and drivers, are being sold in the China market.
Counterfeit IC products show exactly the same outside chip markings but generally are of poor quality
and causes Windows driver compatibility issues (Yellow Mark Error Code 10 in Device Manager under
WinXP, Vista, and 7). This warning is issued to all customers and consumers to avoid confusion and
false purchase. Please purchase only from stores or vendors providing technical and RMA support.
Windows 7 Driver Installation
This section will guide you on how to install the PL-2303 Windows Driver. You can download the latest
Driver Installer program from Prolific Support website:
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225 & pcid=41
Note: Please take notice of the installation order. First, run the Driver Installer Program before
plugging in the USB to Serial adapter. If you already plug the device during the driver installation, you
need to re-plug the device for Windows to enumerate the device and load the drivers installed. If your
device is embedded to the system, you might need to restart the system (or click rescan hardware
changes in Device Manager) to reload and install the driver.
The following steps will show how to install the device under Windows 7 (64-bit) OS as this is the most
inquired driver installation support received by Prolific. The procedures are the same and straightforward for all other supported Windows operating system versions.
Prolific Technology Inc.
- 2 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
1.
Power on your computer and boot to Windows. Run or double-click the PL-2303 Windows Driver
Installer program.
2.
The InstallShield Wizard will be displayed to inform you that the PL-2303 USB-to-Serial driver
will be installed on your computer. Click Next to continue.
Prolific Technology Inc.
- 3 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
3.
The PL-2303 Driver Installer program will then start to install the drivers needed.
4.
Click the Finish button to close the InstallShield program. If you have plugged the cable into the
PC while running the setup installation, please unplug and replug the cable for the system to
detect the device.
Prolific Technology Inc.
- 4 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
5.
Plug in the USB to Serial adapter to the PC USB port. Windows should detect the driver as
Prolific USB-to-Serial Comm Port. Go to Device Manager and check for the 'Prolific
USB-to-Serial Comm Port' device and the COM port number assigned by Windows.
6.
You can also check the driver version by right-clicking on the 'Prolific USB-to-Serial Comm Port'
device and select Properties and Driver tab.
Prolific Technology Inc.
- 5 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Warning!!!
If you are encountering yellow mark (Error Code 10) for device in Device Manager under Windows XP,
Vista, or Windows 7, you need to contact the cable vendor or manufacturer for possible counterfeit
chip. Prolific does not manufacture or sell any end-user market products and will not provide or be
responsible for direct support to end-users.
Prolific Technology Inc.
- 6 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Windows Driver Installation (via Windows Update)
This section will guide you on how to install the PL-2303 Windows Driver via Windows Update. You
will need an Internet connection to be able to automatically download and install the drivers via
Windows Update (for Windows Vista, 7, and 8 only).
1.
Check if your Internet connection is OK. Plug in PL-2303 USB to Serial cable.
2.
Windows will automatically check Windows Update if driver is available and will download and
install the driver instantly.
Prolific Technology Inc.
- 7 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
3.
Windows will then prompt you that Prolific USB-to-Serial Comm Port (COMx) is installed and
ready to use.
Prolific Technology Inc.
- 8 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
4.
You can also right-click on the USB-Serial Controller device and click Update Driver.
Prolific Technology Inc.
- 9 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Prolific Technology Inc.
- 10 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Windows 8 Supported Chip Versions
This section will guide you on what PL-2303 chip versions are supported by Prolific in Windows 8:
Chip Version
Chip Availability
Windows 8 (32 & 64 bit)
PL-2303H
Discontinued (EOL)
No New Driver Support*
PL-2303HX (Rev A) or HXA
Discontinued (EOL)
No New Driver Support*
PL-2303X or XA
Discontinued (EOL)
No New Driver Support*
PL-2303HX (Rev D) or HXD
Available
Yes
PL2303TA
Available
Yes
PL2303TB
Available
Yes
PL2303EA
Available
Yes
PL2303RA
Available
Yes
PL2303SA
Available
Yes
* - New Driver does not support PL-2303H, PL2303HX (Rev A), and PL2303X in Windows 8. It will show a yellow
mark (Error Code 10) in Device Manager similar to what counterfeit chips would show.
Check Chip Version Tool
Prolific provides a tool program together with the driver to check the chip version of your device for
Windows8-ready driver support.
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225 & pcid=41
NOTE:
This tool will not work in Windows 8 if the PL-2303 device shows a yellow mark in Device Manager.
You need to use Windows 7 or XP to run the tool program for discontinued chip versions.
Prolific Technology Inc.
- 11 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Windows 8 Driver Installation
This section will guide you how to install the PL-2303 device in Windows 8 Operating System. You
can download the latest Driver Installer program from Prolific Support website:
http://www.prolific.com.tw/eng/downloads.asp?ID=31
1.
Power on your computer and boot to Windows 8. Run or double-click the PL-2303 Windows
Driver Installer v1.8.0 program.
2.
The InstallShield Wizard will be displayed to inform you that the PL-2303 USB-to-Serial driver
will be installed on your computer. Click Next to continue.
Prolific Technology Inc.
- 12 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
3.
The PL-2303 Driver Installer program will then start to install the drivers needed. Click the Finish
button to close the InstallShield program.
4.
Plug in the USB to Serial adapter to the PC USB port. Windows should detect the driver as
'Prolific USB-to-Serial Comm Port'. Go to Device Manager and check for the device and the
COM port number assigned by Windows. You can also check the driver version by right-clicking
on the 'Prolific USB-to-Serial Comm Port' device and select Properties and Driver tab.
Prolific Technology Inc.
- 13 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
5.
The COM Port number for the PL-2303 is assigned by the Windows Operating System. If you
encounter a device that shows a yellow mark (Error Code 10), you need to check if that device is
using an old version Prolific chip (PL-2303HXA or PL-2303XA) or a counterfeit chip. As
mentioned in the previous sections, Prolific does not support old version chips in Windows 8.
Prolific Technology Inc.
- 14 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Windows 8 Driver Installation (via Windows Update)
This section will guide you on how to install the PL-2303 Windows Driver via Windows Update. You
will need an Internet connection to be able to automatically download and install the drivers via
Windows Update.
1.
Check if your Internet connection is OK. Plug in PL-2303 USB to Serial cable.
2.
Windows will automatically check Windows Update if driver is available and will download and
install the driver instantly.
Prolific Technology Inc.
- 15 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
3.
Windows will then prompt you that Prolific USB-to-Serial Comm Port (COMx) is installed and
ready to use.
Prolific Technology Inc.
- 16 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
4.
You can also right-click on the USB-Serial Controller device and click Update Driver.
Prolific Technology Inc.
- 17 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Prolific Technology Inc.
- 18 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Uninstalling the PL-2303 Driver
To uninstall the PL-2303 driver, follow the below steps:
1.
Click Start - Control Panel - Programs - Programs and Features - Uninstall a Program. Look for
the 'PL-2303 USB-to-Serial' program and click the Uninstall (Remove) button.
2.
InstallShield Wizard will then start the maintenance program and will prompt you to choose if you
want to modify, repair, or remove the driver. Click the Remove button and click Next to begin the
driver uninstall.
Prolific Technology Inc.
- 19 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
3.
The InstallShield Wizard will prompt you to confirm to uninstall. Click Yes to continue.
4.
Wait for the InstallShield Wizard to complete the uninstall process. When complete, click Finish
to end the program. Wait for some few seconds until the 'PL-2303 USB-to-Serial' program is
removed from the Control Panel Uninstall (Add or Remove Programs) program list.
Prolific Technology Inc.
- 20 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
PL2303 USB-to-Serial Bridge Chip Family
Windows Driver Installer User Manual
WHQL Driver Version Information
? Driver Installer & Build date: 1.8.0 (2013-2-26)
?
?
Windows 2000 / Windows XP (32 & 64-bit) WHQL Driver: v2.1.44.226 (2/5/2013)
?
?
GUID: ECC3713C-08A4-40E3-95F1-7D0704F1CE5E
Compatible with Server 2003 (32 & 64-bit)
Windows Vista / Windows 7 / Windows 8 (32 & 64-bit) WHQL Driver: v3.4.48.272 (2/5/2013)
?
Compatible with Server 2008, Server 2008R2, Server 2012 (32 & 64-bit)
?
Drivers can also automatically install via Windows Update (need Internet connection)
System Requirements
?
PC with USB 1.1/2.0/3.0 Host Controller (USB Port) and following Windows OS Family:
?
?
Windows XP SP2 or SP3 (32 & 64 bit)
?
Windows Server 2003 (32 & 64 bit)
?
Windows Vista (32 & 64 bit)
?
Windows 7 (32 & 64 bit)
?
Windows Server 2008 / 2008 R2 (32 & 64 bit)
?
Windows 8 (32 & 64 bit)
?
?
Windows 2000 SP4
Windows Server 2012 (32 & 64 bit)
USB Device with below PL-2303 chip versions and their supported OS Family:
Windows 2000 / XP
Vista / Windows 7
Windows 8
(32 & 64 bit)
(32 & 64 bit)
(32 & 64 bit)
PL-2303H
Yes
Yes
Not Supported*
PL-2303HX (Rev A) or HXA
Yes
Yes
Not Supported*
PL-2303X or XA
Yes
Yes
Not Supported*
PL-2303HX (Rev D) or HXD
Yes
Yes
Yes
PL2303TA
Yes
Yes
Yes
PL2303TB
Yes
Yes
Yes
PL2303EA
Yes
Yes
Yes
PL2303RA
Yes
Yes
Yes
PL2303SA
Yes
Yes
Yes
Chip Version
* - PL2303H, PL-2303HX (Rev A), and PL-2303X are EOL and discontinued chips and Prolific will not
provide Windows 8 driver support. New driver versions will show yellow mark (Error Code 10) in Device
Manager for these EOL chip versions under Windows 8. Prolific recommends using PL2303HXD chip.
Prolific Technology Inc.
- 1 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Counterfeit Warning!!!
Please be warned that counterfeit/fake PL-2303HX Rev A (or PL-2303HXA) USB-to-Serial Controller
ICs using Prolific's trademark logo, brandname, and drivers, are being sold in the China market.
Counterfeit IC products show exactly the same outside chip markings but generally are of poor quality
and causes Windows driver compatibility issues (Yellow Mark Error Code 10 in Device Manager under
WinXP, Vista, and 7). This warning is issued to all customers and consumers to avoid confusion and
false purchase. Please purchase only from stores or vendors providing technical and RMA support.
Windows 7 Driver Installation
This section will guide you on how to install the PL-2303 Windows Driver. You can download the latest
Driver Installer program from Prolific Support website:
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225 & pcid=41
Note: Please take notice of the installation order. First, run the Driver Installer Program before
plugging in the USB to Serial adapter. If you already plug the device during the driver installation, you
need to re-plug the device for Windows to enumerate the device and load the drivers installed. If your
device is embedded to the system, you might need to restart the system (or click rescan hardware
changes in Device Manager) to reload and install the driver.
The following steps will show how to install the device under Windows 7 (64-bit) OS as this is the most
inquired driver installation support received by Prolific. The procedures are the same and straightforward for all other supported Windows operating system versions.
Prolific Technology Inc.
- 2 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
1.
Power on your computer and boot to Windows. Run or double-click the PL-2303 Windows Driver
Installer program.
2.
The InstallShield Wizard will be displayed to inform you that the PL-2303 USB-to-Serial driver
will be installed on your computer. Click Next to continue.
Prolific Technology Inc.
- 3 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
3.
The PL-2303 Driver Installer program will then start to install the drivers needed.
4.
Click the Finish button to close the InstallShield program. If you have plugged the cable into the
PC while running the setup installation, please unplug and replug the cable for the system to
detect the device.
Prolific Technology Inc.
- 4 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
5.
Plug in the USB to Serial adapter to the PC USB port. Windows should detect the driver as
Prolific USB-to-Serial Comm Port. Go to Device Manager and check for the 'Prolific
USB-to-Serial Comm Port' device and the COM port number assigned by Windows.
6.
You can also check the driver version by right-clicking on the 'Prolific USB-to-Serial Comm Port'
device and select Properties and Driver tab.
Prolific Technology Inc.
- 5 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Warning!!!
If you are encountering yellow mark (Error Code 10) for device in Device Manager under Windows XP,
Vista, or Windows 7, you need to contact the cable vendor or manufacturer for possible counterfeit
chip. Prolific does not manufacture or sell any end-user market products and will not provide or be
responsible for direct support to end-users.
Prolific Technology Inc.
- 6 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Windows Driver Installation (via Windows Update)
This section will guide you on how to install the PL-2303 Windows Driver via Windows Update. You
will need an Internet connection to be able to automatically download and install the drivers via
Windows Update (for Windows Vista, 7, and 8 only).
1.
Check if your Internet connection is OK. Plug in PL-2303 USB to Serial cable.
2.
Windows will automatically check Windows Update if driver is available and will download and
install the driver instantly.
Prolific Technology Inc.
- 7 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
3.
Windows will then prompt you that Prolific USB-to-Serial Comm Port (COMx) is installed and
ready to use.
Prolific Technology Inc.
- 8 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
4.
You can also right-click on the USB-Serial Controller device and click Update Driver.
Prolific Technology Inc.
- 9 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Prolific Technology Inc.
- 10 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Windows 8 Supported Chip Versions
This section will guide you on what PL-2303 chip versions are supported by Prolific in Windows 8:
Chip Version
Chip Availability
Windows 8 (32 & 64 bit)
PL-2303H
Discontinued (EOL)
No New Driver Support*
PL-2303HX (Rev A) or HXA
Discontinued (EOL)
No New Driver Support*
PL-2303X or XA
Discontinued (EOL)
No New Driver Support*
PL-2303HX (Rev D) or HXD
Available
Yes
PL2303TA
Available
Yes
PL2303TB
Available
Yes
PL2303EA
Available
Yes
PL2303RA
Available
Yes
PL2303SA
Available
Yes
* - New Driver does not support PL-2303H, PL2303HX (Rev A), and PL2303X in Windows 8. It will show a yellow
mark (Error Code 10) in Device Manager similar to what counterfeit chips would show.
Check Chip Version Tool
Prolific provides a tool program together with the driver to check the chip version of your device for
Windows8-ready driver support.
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225 & pcid=41
NOTE:
This tool will not work in Windows 8 if the PL-2303 device shows a yellow mark in Device Manager.
You need to use Windows 7 or XP to run the tool program for discontinued chip versions.
Prolific Technology Inc.
- 11 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Windows 8 Driver Installation
This section will guide you how to install the PL-2303 device in Windows 8 Operating System. You
can download the latest Driver Installer program from Prolific Support website:
http://www.prolific.com.tw/eng/downloads.asp?ID=31
1.
Power on your computer and boot to Windows 8. Run or double-click the PL-2303 Windows
Driver Installer v1.8.0 program.
2.
The InstallShield Wizard will be displayed to inform you that the PL-2303 USB-to-Serial driver
will be installed on your computer. Click Next to continue.
Prolific Technology Inc.
- 12 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
3.
The PL-2303 Driver Installer program will then start to install the drivers needed. Click the Finish
button to close the InstallShield program.
4.
Plug in the USB to Serial adapter to the PC USB port. Windows should detect the driver as
'Prolific USB-to-Serial Comm Port'. Go to Device Manager and check for the device and the
COM port number assigned by Windows. You can also check the driver version by right-clicking
on the 'Prolific USB-to-Serial Comm Port' device and select Properties and Driver tab.
Prolific Technology Inc.
- 13 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
5.
The COM Port number for the PL-2303 is assigned by the Windows Operating System. If you
encounter a device that shows a yellow mark (Error Code 10), you need to check if that device is
using an old version Prolific chip (PL-2303HXA or PL-2303XA) or a counterfeit chip. As
mentioned in the previous sections, Prolific does not support old version chips in Windows 8.
Prolific Technology Inc.
- 14 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Windows 8 Driver Installation (via Windows Update)
This section will guide you on how to install the PL-2303 Windows Driver via Windows Update. You
will need an Internet connection to be able to automatically download and install the drivers via
Windows Update.
1.
Check if your Internet connection is OK. Plug in PL-2303 USB to Serial cable.
2.
Windows will automatically check Windows Update if driver is available and will download and
install the driver instantly.
Prolific Technology Inc.
- 15 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
3.
Windows will then prompt you that Prolific USB-to-Serial Comm Port (COMx) is installed and
ready to use.
Prolific Technology Inc.
- 16 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
4.
You can also right-click on the USB-Serial Controller device and click Update Driver.
Prolific Technology Inc.
- 17 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Prolific Technology Inc.
- 18 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
Uninstalling the PL-2303 Driver
To uninstall the PL-2303 driver, follow the below steps:
1.
Click Start - Control Panel - Programs - Programs and Features - Uninstall a Program. Look for
the 'PL-2303 USB-to-Serial' program and click the Uninstall (Remove) button.
2.
InstallShield Wizard will then start the maintenance program and will prompt you to choose if you
want to modify, repair, or remove the driver. Click the Remove button and click Next to begin the
driver uninstall.
Prolific Technology Inc.
- 19 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permis sion of the manufacturer.
PL2303 Windows Driver User's Manual
For Driver Installer v1.8.0 Release
For Microsoft Windows Operating Systems
3.
The InstallShield Wizard will prompt you to confirm to uninstall. Click Yes to continue.
4.
Wait for the InstallShield Wizard to complete the uninstall process. When complete, click Finish
to end the program. Wait for some few seconds until the 'PL-2303 USB-to-Serial' program is
removed from the Control Panel Uninstall (Add or Remove Programs) program list.
Prolific Technology Inc.
- 20 of 20 -
February 26, 2013
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
Pl2303 Eeprom Writer Program Download
PL2303_Prolific_DriverInstaller_v1_8_0.zip > PL2303_DriverInstallerv1.8.0_ReleaseNote.txt
PL2303 Driver Setup Installer, Prolific Edition
Setup Installer Revision Note History
** Prolific recommends using PL2303HXD (HX Rev D) or PL2303TA chip version **
------------------------------------------------------------------------------
NOTE: PL-2303HXA (HX Rev A) and PL-2303XA have been discontinued (EOL) on October 2012.
Customers and end-users are advised to change to PL2303HXD or PL2303TA chip.
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=212 & pcid=41
Windows 8 Driver Support!!!
Please note the following for Windows 8 Driver Support:
- PL2303H (Not Supported) - will show yellow mark Error Code 10 in Device Manager. This chip is EOL.
- PL2303HX Rev A (Not Supported) - will show yellow mark Error Code 10 in Device Manager. This chip is EOL (10/2012).
- PL2303X (Not Supported) - will show yellow mark Error Code 10 in Device Manager. This chip is EOL (10/2012).
- PL2303HX Rev D (Supported)
- PL2303EA (Supported)
- PL2303RA (Supported)
- PL2303SA (Supported)
- PL2303TA (Supported)
- PL2303TB (Supported)
For more:
http://www.prolific.com.tw/US/ShowProduct.aspx?pcid=41 & showlevel=0041-0041
System Requirement:
. USB 1.1/2.0/3.0 Host Controller
. Device using PL2303HXD/EA/RA/SA/TA/TB version chips
. Supports the following Windows OS Family:
- Windows 2000 SP4
- Windows XP SP2 and above (32 & 64 bit)
- Windows Server 2003 (32 & 64 bit)
- Windows Vista (32 & 64 bit)
- Windows 7 (32 & 64 bit)
- Windows Server 2008 / 2008 R2 (32 & 64 bit)
- Windows 8 (32 & 64 bit)
- Windows Server 2012
NOTE:
- Windows 8 is NOT supported in PL2303HXA/XA chip versions.
- Windows 8 is supported only in following chip versions:
- PL2303HXD (HX Rev D)
- PL2303EA (HXD with ESD protection)
- PL2303RA (HXD with Built-in transceiver)
- PL2303SA (HXD SOP8 package)
- PL2303TA (PL2303HXA/XA replacement)
- PL2303TB (12 GPIO)
- Download latest PL2303 CheckChipVersion tool program to check chip version.
- Windows 98 and ME driver support are discontinued. Provided separately.
Supported device ID and product strings:
. VID_067B & PID_2303 for " Prolific USB-to-Serial Comm Port " (PL2303HXA/XA/HXD/EA/RA/SA/TA chips)
. VID_067B & PID_2304 for " Prolific USB-to-Serial Comm Port " (PL2303TB chip)
Driver Versions:
-------------------
- Windows 2000/XP/Server2003 (32 & 64-bit) WDM WHQL Driver: v2.1.44.226 (2/5/2013)
- Windows Vista/7/Server2008 (32 & 64-bit) WDF WHQL Driver: v3.4.48.272 (2/5/2013)
Release Notes:
---------------
PL2303 Driver Installer v1.8.0
Installer & Build date: 1.8.0 (2013-2-25)
GUID:ECC3713C-08A4-40E3-95F1-7D0704F1CE5E
Windows Vista/7/Server2008/Server2008R2/8 Driver Changes v3.4.48.272
Driver Change from v3.4.36.247 (Driver Installer v1.7.0):
----------------------------------------------------------
. Fixed 110 bps on PL2303RA/SA/EA/TA/TB.
. Modify CheckChipVersion API (do not lock VID/PID).
. Fixed HXD chip is detected as HXC chip when BCD is written as 0300 instead of 0400.
. Added 80bps baud support.
. Fixed GPS device will be detected as MS Serial Ballpoint device.
. Fixed driver conflict with different VID/PID device. (STATUS_OBJECT_NAME_COLLISION)
. Fixed Teraterm loopback timeout issue.
Driver Change from v3.4.31.231:
------------------------------
. Fixed Putty/HTerm BSOD issue in Win7 64-bit. (for HXD chip only)
. Fixed HyperTerminal timeout issue when transferring large file. (for HXD chip only)
. Fixed Windows HCK logo test for Windows 8, 7, Vista WHQL driver.
Driver Change from v3.4.25.218:
------------------------------
. Added driver support for new chip versions (PL2303EA, RA, SA).
. Supports new CheckChipVersion v1.0.0.2 and above program for checking all Prolific chip version.
. Fixed COM Port won't disappear when unplug PL2303 during data transfer (Write Timeout issue).
. Fixed Putty program BSOD issue on continuous transfer at 115200bps.
. Fixed 12Mbps baudrate support for PL2303TB chip version.
. Does NOT support Windows 8 for EOL chip versions (PL2303H, PL2303HXA, PL2303XA).
. For Windows 8: use PL2303HXD, PL2303TA, PL2303EA, PL2303SA, PL2303RA, PL2303TB.
Driver Change from v3.3.17.203:
------------------------------
. Added driver support for Prolific next-gen USB-to-Serial chips (Codename TA/TB).
- old driver will not work on baudrates higher than 115200bps.
. No driver functional difference for current H/HX/X chip versions.
Driver Change from v3.3.11.152:
------------------------------
. Use different service name in INF file to avoid driver conflict with XP INF driver.
- change line in INF file to {Serial.SVCDESC = " Prolific Serial port WDFdriver " }
. Added USB Selective Suspend power saving feature requested by Notebook PC vendors.
- Chip will go to sleep mode when idle for 10 seconds and COM port not open.
- Chip will NOT go to sleep mode when COM port is OPEN.
- requires to write Remote Wakeup in external EEPROM.
. Modify " SerialUndoExternalNaming " routine.
- Fix COM port is not removed in registry when device is unplug and program still open.
- update registry HKEY_LOCAL_MACHINEHARDWAREDEVICEMAPSERIAL COMM when unplug and replug.
. Added support for TransmitCommChar() function.
. Added SpinLock function to fix customer GPS application.
Windows 2000/XP/Server2003 Driver v2.1.44.2261 (2/5/2013)
Driver Change from v2.1.35.211 (Driver Installer v1.7.0):
---------------------------------------------------------
. Fixed 110 bps on PL2303RA/SA/EA/TA/TB.
. Modify CheckChipVersion API (do not lock VID/PID).
. Fixed HXD chip is detected as HXC chip when BCD is written as 0300 instead of 0400.
. Added 80bps baud support.
. Fixed GPS device will be detected as MS Serial Ballpoint device.
. Fixed Disable-Enable device issue in Windows 2000 Device Manager.
Driver Change from v2.1.30.193:
------------------------------
. Fixed write timeout intermittent issue (COM port won't disappear) during USB surprise removal.
. Fixed new Windows HCK logo test for XP WHQL driver.
Driver Change from v2.1.27.185:
------------------------------
. Added driver support for new chip versions (PL2303EA, RA, SA).
. Supports new CheckChipVersion v1.0.0.2 and above program for checking all Prolific chip version.
. Fixed COM Port won't disappear when unplug PL2303 during data transfer (Write Timeout issue).
. Fixed 12Mbps baudrate support for PL2303TB chip version.
Driver Change from v2.0.16.166:
------------------------------
. Added driver support for Prolific next-gen USB-to-Serial chips (Codename TA/TB).
- old driver will not work on baudrates higher than 115200bps.
. No driver functional difference for current H/HX/X chip versions.
Driver Change from v2.0.13.130:
------------------------------
. Use different service name in INF file to avoid driver conflict with Vista/7 INF driver.
- change line in INF file to {Serial.SVCDESC = " Prolific Serial port WDMdriver " }
. Added 10ms delay (downstream buffer) on close COM port to fix customer MCU application.
Language Support:
- English (default)
- Chinese (Traditional)
- Chinese (Simplified)
- Japanese
Download Latest Driver here:
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225 & pcid=41
Counterfeit Warning!!!
Please be warned that counterfeit/fake PL-2303HX Chip Rev A (or PL-2303HXA) USB to Serial Controller ICs using Prolific's trademark logo, brandname, and device drivers, are being sold in the China market. Counterfeit IC products show exactly the same outside chip markings but generally are of poor quality and causes Windows driver compatibility issues (Yellow Mark Error Code 10 in Windows 7 Device Manager). We issue this warning to all our customers and consumers to avoid confusion and false purchase. Only purchase branded cables that provide technical support and warranty service. Prolific does not manufacture nor sell end-product cables.
How to Install Driver
1. Unplug any PL2303 USB Device first.
2. Run Driver Installer EXE program to install. Wait to finish.
3. Plug PL2303 USB Device and go to Device Manager to check COM Port number.
4. If PL2303 is embedded, you might need to restart Windows or rescan hardware in Device Manager.
5. Refer to PL2303 Windows Driver User's Manual.
Prolific Technology Inc.
http://www.prolific.com.tw
PL2303_Prolific_DriverInstaller_v1_8_0.zip > PL2303CheckChipVersion_ReadMe.txt
Pl2303 Eeprom Writer Program For Windows 10
PL-2303 CheckChipVersion Tool Program v1.0.0.6
For Windows OS Only
System Requirement:
. USB 1.1/2.0/3.0 Host Controller
. Device using PL2303HX/X/EA/RA/SA/TA/TB version chips
. PL-2303 Windows Driver Installer v1.8.0
- Windows 2000/XP/Server2003 (32 & 64-bit) WDM WHQL Driver: v2.1.44.226
- Windows Vista/7/Server2008 (32 & 64-bit) WDF WHQL Driver: v3.4.48.272
. Supports the following Windows OS Family:
- Windows XP SP2 and above (32 & 64 bit)
- Windows Vista (32 & 64 bit)
- Windows 7 (32 & 64 bit)
- Windows 8 (32 & 64 bit)
NOTE:
- Windows 8 is NOT supported in HXA/XA chip versions (will show yellow mark Error Code 10).
- Windows 8 is supported only in following chip versions:
- PL2303HXD (HX Rev D)
- PL2303EA (ESD protection)
- PL2303RA (Built-in transceiver)
- PL2303SA (SOP8 package)
- PL2303TA (PL2303HXA/XA replacement)
- PL2303TB (12 GPIO)
Supported device ID and product strings:
. VID_067B & PID_2303 for " Prolific USB-to-Serial Comm Port "
. VID_067B & PID_2304 for " Prolific USB-to-Serial Comm Port " (PL2303TB chip)
. Other VID/PID based on PL2303 chip.
Release Notes:
---------------
PL2303CheckChipVersion v1.0.0.6
. Do not lock VID/PID.
How to Run Tool Program
1. Install PL-2303 Windows Driver Installer v1.8.0.
2. Plug PL2303 USB Device and go to Device Manager to check COM Port number.
3. Run PL2303CheckChipVersion tool and set COM Port number.
4. Click Check button to show PL-2303 chip version.
Download Latest Driver here:
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225 & pcid=41
Prolific Technology Inc.
http://www.prolific.com.tw